[Free] 2018(Jan) EnsurePass Pass4sure Oracle 1z0-460 Dumps with VCE and PDF Download 21-30

Ensurepass.com : Ensure you pass the IT Exams 2018 Jan Oracle Official New Released 1z0-460
100% Free Download! 100% Pass Guaranteed!

Oracle Linux 6 Implementation Essentials

Question No: 21

You have successfully installed the uptrack tool on servers you will be using ksplice kernel updates. Which two options are correct descriptions of commands you can run?

  1. “uptrack-show”: list the active Oracle Ksplice updates in your running kernel.

  2. “uptrack-upgrade”: connect to the Uptrack update server, check and apply new updates when available.

  3. “uptrack-upgrade”: connect to the Uptrack update server, check and download a new update to the uptrack tool.

  4. “uptrack-show lt;keygt;”: list the servers that have the uptrack tool installed using the current key.

Answer: A,B

Explanation: A:uptrack-show

You can see what updates have been installed by running uptrack-show: B:uptrack-upgrade

Ksplice updates are the same security and bugfix updates you would get from your Linux vendor, packaged in a special rebootless form. To apply Ksplice updates, just runuptrack-


Question No: 22

You have executed the following commands as the root user:

# find /home | cpio -o-H tar -F root@HostA: /dev/nst0 – – rsh -command = /usr/bin/ssh What is the purpose of issuing this command?

  1. To archive the contents of the /home directory in the tar format to a remote host system’s tape drive device /dev/nst0

  2. To archive the contents of the /home directory in the cpio format to a remote host system’s tape device /dev/nst0

  3. To archive the contents of the /home directory in the cpio and tar formats to a remote system’s tape drive device /dev/nst0

  4. To extract the contents of the /home directory from the tape drive device /dev/nst0

Answer: A Explanation:


*The cpio command is one of standard Unix backup utilities. It stands for quot;copy in/out.quot; It is much less well known and more rarely used Unix utility in comparison with tar.

*The cpio command is one of standard Unix backup utilities. It stands for quot;copy in/out.quot; It is much less well known and more rarely used Unix utility in comparison with tar.

* -H format. Here tar

Question No: 23

Examinethe sar command below.Your Oracle Linux systemhas one CPU. What does the runq-sz columnof this output conveyabout your system?

Ensurepass 2018 PDF and VCE

  1. CPU is bottleneck because the run queue size is greater than the number of CPUs on your system.

  2. The average of three processes are only using the CPU on your system and hence the CPU is not a bottleneck.

  3. CPU is not a bottleneck because the run queue size indicates the number of CPU bound processes on your system.

  4. CPU is a bottleneck because the run queue size indicates that adequate memory is not allocated.

Answer: A

Explanation: *Use the sar -q command to report the following information: The Average queue length while the queue is occupied.

The percentage of time that the queue is occupied.

*The following list describes the output from the -q option. runq-sz

The number of kernel threads in memory that are waiting for a CPU to run. Typically, this value should be less than 2. Consistently higher values mean that the system might be CPU-bound.


The percentage of time that the dispatch queues are occupied.


Swap queue of processes for the sar command.


Swap queue of processes for the sar command.

Question No: 24

You wantto allow multiple users the write access to files within the same directory, in addition, you want all the new files created in this directory to be of the required group instead of the primary ID of the user who creates the file. How do you accomplish this?

  1. Set the setgid bit on the directory.

  2. Change the group owner of the new files manually.

  3. Run a cron job to change the group owner.

  4. Changethe primary group ID of every user to the required group.

Answer: A

Explanation: Linux: SETGID on directory

SETGID stands for SET Group ID. We can use the command chmod to set the group ID bit for a directory.

chmod g s mydir

or with numeric mode: chmod 2775 mydir

After the change, the permission of the directory quot;mydirquot; becomes quot;drwxrwsr-xquot;. drwxrwsr-x 3 zen zen 4096 2010-03-18 19:57 mydir

But what is so special about setting the group ID for a directory? The trick is that when another user creates a file or directory under such a directory quot;mydirquot;, the new file or directory will have its group set as the group of the owner of quot;mydirquot;, instead of the group of the user who creates it.

For example, if user2 belongs to the groups quot;user2quot; (main group) and quot;zenquot;, and he creates a file quot;newfilequot; under the diretory quot;mydirquot;, quot;newfilequot; will be owned by the group of quot;zenquot; instead of user2#39;s main group ID quot;user2quot;.

Question No: 25

You have to aggregate two network interfaces, eth0 and eth1, into a single logical interface such as bond0. Which option shows the four configuration files that need to be configured to set up this bonding?

  1. /etc/sysconfig/network-scripts/ifcfg-bond0




  2. /etc/sysconfig/network-scripts/ifcfg-bond0




  3. /etc/sysconfig/network/ifcfg-bond0




  4. /etc/sysconfig/network-scripts/ifcfg-bond0




Answer: C

Explanation: *Step #1: Create a Bond0 Configuration File

Red Hat Enterprise Linux (and its clone such as CentOS) stores network configuration in

/etc/sysconfig/network-scripts/ directory. First, you need to create a bond0 config file as follows:

# vi /etc/sysconfig/network-scripts/ifcfg-bond0

*Step #2: Modify eth0 and eth1 config files

Open both configuration using a text editor such as vi/vim, and make sure file read as follows for eth0 interface# vi /etc/sysconfig/network-scripts/ifcfg-eth0

*Step # 3: Load bond driver/module

Make sure bonding module is loaded when the channel-bonding interface (bond0) is brought up. You need to modify kernel modules configuration file:

For each configured channel bonding interface, there must be a corresponding entry in

your new /etc/modprobe.d/bonding.conf file.

Question No: 26

Your Oracle Linux system has two network interfaces – eth0 and eth1. You have to change the netmask and the IP address of the eth1 network interface. Which configuration file would you edit to make these changes?

  1. /proc/net/ifcg-eth1

  2. /etc/sysconfig/network-scripts/eth1

  3. /etc/sysconfig/network/ifcg-eth1

  4. /etc/sysconfig/network-scripts/ifcfg-eth1

Answer: D

Explanation: The quot;/etc/sysconfig/network-scripts/ifcfg-eth0quot; file holds the network configuration for the quot;eth0quot; adapter. If you have multiple network adapters, you would expect additional configuration files (eth1, eth2 etc.).


*The quot;/etc/sysconfig/networkquot; file holds top-level networking configuration, including the hostname and gateway settings.

Question No: 27

The crond daemon checks each command to see whether it should be run in the current


  1. Second

  2. Minute

  3. Hour

  4. Day

Answer: B

Explanation: The cron utility then wakes up every minute, examining all stored crontabs, checking each command to see if it should be run in the current


Question No: 28

Which two statements are correct about the Oracle ASMLib library?

  1. Oracle ASMLib is an optional support library for the Automatic Storage Management (ASM) feature.

  2. To use ASMLib library, you have to recompile it first for the Unbreakable Enterprise Kernel.

  3. Oracle Automatic Storage management (ASM) requires Oracle ASMLib library to function completely.

  4. Oracle ASMLib kernel driver is included in the Unbreakable Kernel.

Answer: A,D

Explanation: A (not C):ASMLib is an optional support library for the Automatic Storage Management feature of the Oracle Database.

ASMLib allows an Oracle Database using ASM more efficient and capable access to the disk groups it is using.

D (not B):The Oracle ASMLib kernel driver is now included in the Unbreakable Enterprise Kernel. No driver package needs to be installed when using this kernel.

Question No: 29

You have to collect information about your Oracle Linux 6 system, such as hardware configuration, installed software packages, configuration, and operational state send it to Oracle Support. Which tool will help you gather this information for sending it to Oracle Support?

  1. sosreport

  2. iostat

  3. kdump

  4. strace

  5. systemstat

Answer: A

Explanation: sosreport – Generate debugging information for this system

sosreport generates a compressed tarball of debugging information for the system it is run on that can be sent to technical support reps that will give them a more complete view of the overall system status.


Not B:The iostat command is used for monitoring system input/output device loading by observing the time the devices are active in relation to their average transfer rates. The iostat command generates reports that can be used to change system configuration to better balance the input/output load between physical disks.

Not C:kdump.conf is a configuration file for the kdump kernel crash collection service.

kdump.conf provides post-kexec instructions to the kdump kernel. It is stored in the initrd file managed by the kdump service. If you change this file and do not want to restart before it takes effect, restart the kdump service to rebuild to initrd.

Not D:strace – trace system calls and signals

Question No: 30

What does the following btrfs command do?

$ sudo btrfs subvolume snapshot src src-01

  1. Creates snapshots of the src src-01 subvolumes

  2. Creates a snapshot of the src-01 subvolumes in src

  3. Creates the src and src-01 subvolumes and takes a snapshot of these subvolumes

  4. Creates a snapshot of the src subvolumes in src-01

Answer: D

Explanation: *To create a snapshot use

sudo btrfs subvolume snapshot /mnt/@ /mnt/@_snapshot

this will create a snapshot of the @ subvolume named @_snapshot located also in the top

of the btrfs tree.

*btrfs subvolume snapshot lt;sourcegt; [lt;destgt;/]lt;namegt; Create a writable snapshot of the subvolume lt;sourcegt; with the name lt;namegt; in the lt;destgt; directory.

100% Ensurepass Free Download!
Download Free Demo:1z0-460 Demo PDF
100% Ensurepass Free Guaranteed!
1z0-460 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Add a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.